Contact Information

Dr. Tony Pescatore, Ph.D.
Interim Department Chair

900 W.P. Garrigus Building Lexington, KY 40546-0215

+1 (859) 257-2686

Profitable Feeding Programs for Dairy Cattle

Profitable Feeding Programs for Dairy Cattle

Profitable Feeding Programs for Dairy Cattle

The overall goal of a sound, profitable dairy feeding program for the milking herd is to convert home-grown forages into milk. With our heifer rearing programs, we are looking for efficient growth of heifers so that they can become profitable, milk-producing units after calving. Grain mixes need to be formulated to complement forages being fed such grain mixes provide the nutrients which are not supplied by the forages themselves.

Several steps are involved in developing these sound and practical nutritional programs for one's dairy business. These steps include:

  • Step 1: Testing forages to determine their nutrient content
  • Step 2: Balancing rations for heifers, dry cows, and milking cows
  • Step 3: Implementing the balanced ration
  • Step 4: Evaluate how well the feeding program has worked and implement changes to improve the program, if necessary.

Often times, steps 3 and 4 are not associated with the development of a profitable feeding program but in reality, they are the most important steps in this process.

Step 1: Test Forages to Determine Their Nutrient Content

Testing forages to accurately determine their dry matter and nutrient content is an essential starting point for developing a sound and profitable nutrition program. The nutrient content of forages varies with stage of maturity when harvested.  Even when harvested at the same stage of maturity, variations in nutrient content are seen between cuttings within a crop year and between crop years. For example, if your corn silage tested 6.6 % crude protein instead of the average of 8.2 and cows consumed 50 lbs of corn silage, your cows would have been underfed protein if you had not tested the silage and just assumed that the protein was 8.2%. This deficiency in protein is the amount of crude protein needed to produce 9 lbs of milk. The same concept holds when energy is underfed, cows will not milk to their potential and/or they may not easily rebreed. On the other side of the coin, if your silage was higher in protein, a lower protein grain mix could be fed which would lower feed costs. Also, if it was higher in energy, less grain would need to be fed. With feed costs representing 40 to 60% of the cost of producing milk, knowing the correct nutrient content of forages is very important from an economic perspective.

All forages, irrespective whether they will be fed to the milking cows, heifers, or dry cows, need to be tested. All lots of hay should be sampled using a hay probe while sampling at least 10 bales of hay. Sampling one or two bales of hay is not an accurate way to sample hay. (A lot of hay is defined as those bales which were harvested from the same field and cutting.) Your local feed company or extension agent can help you take representative samples and get your forages tested.

Testing forages and balancing rations for heifers and dry cows are critical in order to get heifers to grow efficiently and prevent dry cows from losing or gaining too much weight. Heifers not supplied with adequate amounts of protein are smaller in stature whereas heifers deficient in energy are light-weight for their age. Both of these nutrient shortages may reduce milk production after calving and/or result in higher rearing costs. Dry cows should be turned dry in good body condition and they should not lose or gain body condition during the dry period. Dry cows which calve at higher or lower than ideal body condition scores may produce 1000 to 1500 lb less milk in the next lactation and may not rebreed in a timely manner. Rations not properly balanced for energy can result in dry cows losing weight or gaining too much weight.

Forages need to be allocated based on the quality of the forage as it relates to the cattle’s nutrient needs. Early lactation cows and baby calves need to be fed the highest quality hay or forages available. Both of these groups are unable to consume enough feed to meet their nutrient needs. Thus, they need the highest quality forage available to receive as many nutrients as possible out of each bite of feed. Heifers over 5 months of age and dry cows can utilize forages of lower quality. Here, the key word is lower quality, not poor quality. Adequate amounts of grain need to be fed to meet their energy and protein needs. Hay or silages of lower quality which are not supplemented correctly will not allow heifers to grow in stature and weight at the correct rate. Dry cows, fed low-quality forages or not fed the appropriate amount of grain, lose weight and these dry cows will not milk as well during the next lactation. Feeding excessive amounts of corn silage to heifers and dry cows can result in over-conditioned animals.

Step 2: Work With Your Nutritionist to Balance Rations for Your Heifers, Dry Cows, and Milking Cows.

Once your forages are tested, these results should be used to formulate a ration which fits your feeding system as well as supplies cows with the nutrients they need. Often times, I have seen farmers spend quite a bit of time getting their forages sampled and then not have a ration balanced for their cattle. Rations which are deficient in any particular nutrient can decrease milk production, growth rates of heifers, reproduction efficiency, and/or cause health problems. On the other hand, rations which contain excess nutrients decrease profits and may result in other health problems.

Work with your nutritionist to get a ration you feel comfortable mixing and feeding and one your cows will eat. Rations should be balanced to utilize the forages on hand. Just as importantly, these rations should be balanced to reflect the amount of these forages on hand and a particular feeding system. Make sure you understand the amount of each feedstuff which should be fed. Also, it is very important you understand why different feedstuffs were added to the ration. For example with finely chopped corn silage, it may be critical that your cows consume a set amount (5-10 lb) of above-average quality hay or else they will have health problems later or may even die.

Rations need to be reformulated when the type of forage or the quality of the forage changes. Changes in the type and quality of forages can affect the amount of nutrients cows receive. These small changes could decrease milk production, the ability of a cow to regain body condition or weight during the second half of her lactation, impact the ability to rebreed, or decrease the growth rate of heifers. On the flip side of the coin, we do not want to overfeed and ineffectively use our financial resources. Thus, rations need to be re-evaluated frequently to make sure heifers and cows are receiving the nutrients needed.

Many different combinations of forage and concentrates will meet the nutrient needs of cows. The goal is to find a cost-efficient combination which you, the farmer, are comfortable feeding and which is balanced to meet the cows’ (or heifers’) nutrient needs.

Step 3: Putting the Feeding Program in Place, Implementing a Sound Feeding Program

Testing forages and balancing a ration to use the available forages is the starting point in developing a sound feeding and management program for the milking herd. Farmers should work closely with their nutritionist in designing a feeding program so the nutrient needs of a dairy cow are met and, at the same time, feed costs are minimized. Once a feeding program has been designed, implementing the feeding program becomes the next critical step and this step is under the control of the farmer and/or the feeder.

Once a ration is balanced on paper, it is important to make changes in your feeding program to reflect the changes in the balanced ration. These changes could include a change in the grain mixture fed to the cows and the amount of each forage being fed. This change is easily made in most feeding systems. Often times, the amount of grain mixture fed is increased or decreased based on the quality of forages being fed. This change is easily overlooked and can have a substantial impact on cash flow. The amount of grain consumed by your cows reflects the amount of energy they receive in addition to the energy found in their forages. Not feeding the appropriate amount of grain or forages can decrease production especially in early lactation cows. Then, reconfirm that you are providing the amount of grains and forages listed on the printed ration. If you are using a TMR mixer, check that the scales are working properly to ensure the correct amount of each feedstuff are in the ration.

Getting cows to consume the combination of forages and grains is the key to getting cows to milk to their potential. The more feed an early lactation cow eats, the more milk she can produce. Feed intake is governed by the size of the cow, how much milk she is producing and how fresh she is. Higher-producing cows need to eat more feed than lower-producing cows. If the feed bunk is empty before the next feeding, cows should be fed more total feed even if that additional amount is not listed on the balanced ration. When feeding a TMR, the amount of additional feed should include more of all feedstuffs in the diet, not just more forage. In other words, feed like there are additional cows in the group. Enough feed bunk or hay ring space must be provided so that all cows including the timid cows and first-calf heifers are able to eat fresh feed when fed. Feed bunks have to be cleaned out routinely. Changes in forages should be made gradually to prevent health problems.

Dairy cows should be managed to encourage them to eat many meals a day. Studies at Michigan State suggested that cows ate ten or more times a day when feed was in front of them at all times. When cows space their feed consumption out over the day, they may spend more time lying down ruminating and the rumen microbes or bugs are more productive. Thus, the cow potentially can produce more milk and she may be healthier.

Often times it is stated that three different rations are fed to dairy cows. The first ration is balanced by the nutritionist, the second reflects the ration fed by the farmer, and the last and most important, is the combination of forages and grains consumed by the cow herself. Taking time to make sure your cows are consuming a balanced ration will pay financial dividends.

 

Step 4: Evaluating the Cost Effectiveness of a Dairy’s Feeding Program

When we look at evaluating a feeding program for dairy cows, we need to look at different aspects.

  1. Are the cows getting enough nutrients to support their milk production? Cows which are underfed protein and/or energy produce less milk. When protein is added to the diet, milk production responds within a week. Cows which do not receive enough energy often times do not peak in production, are thinner than expected for a particular stage of lactation, and may not breed back as quickly. The amount of body condition cows carry at a particular stage of lactation indicates how well a nutrition and management program is working. It is important to evaluate the amount of condition cows carry at various stages of their lactation. Just looking at the amount of condition cows are carrying without knowing their calving date and breeding history reveals very little about how well the nutrition and management program is working.
     

    Recommended Body Condition Scores for Different Stages of Lactation
    Stage of Lactation Body Condition Score
    Calving 3.0-3.25
    Early Lactation 2.5
    Mid-lactation 2.75
    Late Lactation 3.0
    At time of drying off 3.0-3.25

    Minerals and vitamins need to be fed in adequate amounts for efficient milk production. Deficiencies can affect reproduction and the ability of the cow to fight off infections, such as mastitis. To prevent these costly problems, the proper amounts of minerals and vitamins must be supplied and actually consumed by all dairy cattle, including the milking herd, dry cows and heifers.
     

  2. We know that dairy cows are great sorters of their feed. When we evaluate rations we need to minimize the ability of cows to sort their feed. Long (muzzle width) particle size forages are needed to stimulate cud chewing or rumination. When we walk through a group of cows, we want to observe at least 60% of the cows chewing their cud when they are resting.
     
  3. When reviewing a feeding program, we want to make sure this program is cost effective. To accomplish this, review the costs associated with feeding your cows. Are there some ways we can reduce costs while at the same time maintaining or increasing milk production per cow?
     

    • Maximize the use of forages. High-quality forage is the cheapest source of nutrients for milk cows or heifers. A grain mix should be fed to complement the forages. Testing forages and balancing rations are the key to making your forages a very economical part of your feeding program.
    • When was the last time an analysis was taken of your silage and hay? If your samples were taken a couple of months ago, it may be a good time to have another sample taken. Most feed companies run forage analysis at no charge.
    • Does the grain mixture reflect the use of economical commodities for your area?
    • For heifers and dry cows, are you feeding the amount and composition of a grain mixture which reflects their needs and the forages you are feeding?
    • When purchasing a commercial grain mix, look at more than the price of the grain mix.  The cheapest grain mix may or may not be the best buy. Grain mixes differ in their nutrient content as well as amount needing to be fed daily.
    • Evaluate the effectiveness and cost to benefit ratio of the various additives to your cows grain mix. Do these products result in a beneficial response? What is the cost to you to have these included in the grain mix?

     

    As with a business, it is important to review the cost and effectiveness of various management programs. The key to any successful business is making the most profit while containing costs and maximizing productivity.


    Author: Donna Amaral-Phillips

    Printable PDF

    Contact Information

    Dr. Tony Pescatore, Ph.D.
    Interim Department Chair

    900 W.P. Garrigus Building Lexington, KY 40546-0215

    +1 (859) 257-2686